TOYOPUC

TOYOPUC Product information

TOYOPUC-PC

Programmable Safety Field Bus Controller

  1. The safety software circuits has been realized by the redundancy logic circuits.
  2. Short E-Stop reaction time by hi-speed processing time and space saving has been realized
  3. More reliable safety circuit program is available by fault detection function and shorten design lead time.
  4. Field wiring reduction by Safety-networking and safety signal communication
  5. MTTR improvement by employment of control visualization technology

TOYOPUC PC3JG-P

TOYOPUC PC3JG-P

  1. Global oriented I/O module, communication functions and large scale CPU are unified PLC as a TOYOPUC-PC3JG-P.

TOYOPUC PC3JL-CPU

TOYOPUC PC3JL-CPU

  1. PA library function, PC / CMP-LINK:2 port standard, and 7 segment display machine are added for the function/form of PC3J-CPU as it is. Furthermore, it contributes to lead time shortening of the work from circuitry to preservation.

TOYOPUC MX

TOYOPUC MX

  1. In MX-CPU, the thing to replace TOYOPUC-M and PC1 is a possible CPU module. MX-CPU can be installed on CPU-slot and slot 0 of the BASE module of PC3J/PC2J.
  2. Moreover, the MX-BASE can be connected with the PC1 bus (PG-I/O bus), and the I/O card for PC3J can be stored. To use MX-CPU and MX-BASE,TOYOPUC-M and PC1 can be replaced without change in the sequence program of M and PC1 and change in name of I/O LINE.

DLNK series

TOYOPUC J-DLNK-M2

TOYOPUC J-DLNK-M2

  1. The safety software circuits has been realized by the redundancy logic circuits.
  2. Short E-Stop reaction time by hi-speed processing time and space saving has been realized
  3. More reliable safety circuit program is available by fault detection function and shorten design lead time.
  4. Field wiring reduction by Safety-networking and safety signal communication
  5. MTTR improvement by employment of control visualization technology

TOYOPUC DRMT series

TOYOPUC DRMT series

  1. The DRMT series is DeviceNet compatible Remote I/O terminal with input /output wiring short circuit or wire-cutting detection

AS-i M module

TOYOPUC-AS-i M module

  1. It is a master module in accordance with AS-i(Actuator Sensor Interface).
  2. The data of 124 points of input/124 points of output can be exchanged with the 31 slaves or less.
  3. The network wiring length is 100m or less.
  4. The cycle time of AS-i is 5ms or less.
  5. The slave connection is one-touch because of a special cable.
  6. Connected form of network is free.
  7. * AS-i is a cereal ministry wiring system which integrated the signal line with the power supply line.

Peripheral equipments

PCwin

PCwin

  1. PCwin is the graphic language which was prescribed by international standard IEC61131-3 It is the programming tool for TOYOPUC which made a programming by SFC possible.

USB I/F cable

USB I/F cable

  1. This is a cable for connecting the USB terminal and TOYOPUC of a personal computer.